In need of a Riverside Structural Steel and Bolting Special Inspector in Riverside or Inland Empire California? Look no further! We at Riverside Deputy Special Inspection are proficient and skillful in this discipline through the International Code Council. With years of familiarity and experience, we are here to aid you whether it be for a commercial or residential job. You can get a hold of us directly through our website, social media or phone number at (951) 900-1727 for a free Structural Steel and Bolting consultation in Riverside California!
Working as a structural steel and bolting inspector, it is our duty in ensuring that applicable details in any set of city approved plans and specifications are used in the field. Whether it be for bolting of high-strength steel framing or structural steel components of a building, we at Riverside Deputy Special Inspection will analyze the statement of special inspections in the city approved set of plans and specifications. It is our job as a deputy special inspector to validate that the contractor, if applicable, is installing high-strength bolts per city approved plans and specifications. If any material sampling or tests are required, we do our job in verifying and performing these essential duties. When the project is complete, we make sure that a report is submitted stating whether work was done right or not. This daily or final report will be submitted to the building official, contractor, and/or registered design professional.
Here at Riverside Deputy Special Inspection, it is also our job as a Structural Steel and Bolting Deputy Special Inspector to check that proper supplies are being used such as steel shapes, bolts sizes, bolt grades and bolt types. These supplies must be in agreement with the city approved plans and specifications. These supplies shall also be in a satisfactory condition with no deficiencies discovered or a noncompliance report will have to be released.
If material sampling is required, we will make sure it gets tested! We are to verify necessary type, location, frequency and quantities of tests to be completed. A written report declaring that samples were recognized and tested will be sent in either electronically or written by hand. Samples that need to be taken to the lab safely will be our liability. We make sure that examinations will be performed on materials as required by applicable standards and specifications.
When working on any project that requires structural steel and bolting deputy special inspection services, it is our job to check correct sizes, types, and location of bolts and bolt holes with washers, and nuts for applicable connections specified on city approved plans and specifications.It is also our job to verify that storing of bolts, nuts, and washers are safeguarded as necessary per code.
Before installing high strength bolts, it is our position to verify that any faying surfaces at high strength bolting connections are in agreement per applicable code. If bolt tension verification is needed, we make sure we get the job done right. Observing or conducting bolt tension verification tests on any required high-strength bolt assemblies with the approved method and sequence of bolt tightening is something we at Riverside Deputy Special Inspections are familiar with.
Lastly, it is vital to know that when a client schedule’s us on any project, we are to verify that all installed column base plates have the correct design configuration, correct hole sizes, proper clearance for grouting and securely placed and attached in accordance per applicable code and plans.